A02B-0236-C203///////////A02B-0236-C203
A02B-0236-C203
A02B-0236-C203
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
◆品牌熱點ABABB施耐德GE西門子發那科FOXBORO西屋
愛價格好++++++++貿+++++++++++++瘋狂降價
愛貨期短+++++++++++++++++++渠道好
愛產品好+++++++++易++++++++++原裝進口
愛數量多+++++++++++++++++++++大量庫存停產備件
愛售后服務好+++++++商++++++++++++質量保證
◆聯系人：吳工[銷售工程師]
★聯系電話：0592-5072236 * 18965131356
★聯系QQ：1665532815
★公司傳真：0592-5072083
★公司全稱：
廈門航拓電氣有限公司
★公司地址：
廈門市思明區仙岳路582號嘉怡園16樓A單元
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
高壓直流模塊電源
大功率開關型高壓直流電源廣泛應用于靜電除塵、水質改良、醫用X光機和CT機等大型設備。電壓高達50~l59kV,電流達到0.*以上,功率可達100kW。
自從70年代開始,日本的一些公司開始采用逆變技術,將市電整流后逆變?yōu)?kHz左右的中頻,然后升壓。進入80年代,高頻開關電源技術迅速發展。德國西門子公司采用功率晶體管做主開關元件,將電源的開關頻率提高到20kHz以上。并將干式變壓器技術成功的應用于高頻高壓電源,取消了高壓變壓器油箱,使變壓器系統的體積進一步減小。
國內對靜電除塵高壓直流電源進行了研制,市電經整流變?yōu)橹绷?采用全橋零電流開關串聯諧振逆變電路將直流電壓逆變?yōu)楦哳l電壓,然后由高頻變壓器升壓,**整流為直流高壓。在電阻負載條件下,輸出直流電壓達到55kV,電流達到15mA,工作頻率為25.6kHz。
電力有源濾波器
傳統的交流-直流(AC-DC)變換器在投運時,將向電網注入大量的諧波電流,引起諧波損耗和干擾,同時還出現裝置網側功率因數惡化的現象,即所謂“電力公害”,例如,不可控整流加電容濾波時,網側三次諧波含量可達(70~80)%,網側功率因數僅有0.5~0.6。
電力有源濾波器是一種能夠動態抑制諧波的新型電力電子裝置,能克服傳統LC濾波器的不足,是一種很有發展前途的諧波抑制手段。濾波器由橋式開關功率變換器和具體控制電路構成。與傳統開關電源的區別是:(l)不僅反饋輸出電壓,還反饋輸入平均電流; (2)電流環基準信號為電壓環誤差信號與全波整流電壓取樣信號之乘積。
PLC控制系統硬件設計方法應用系統總體方案設計
1．PLC控制系統類型F 由PLC構成的單機控制系統。F 由PLC構成的集中控制系統。F 由PLC構成的分布式控制系統。
F 用PLC構成遠程I／0控制系統。2．系統的運行方式F 手動運行方式。F 半自動運行方式。F 自動運行方式。
二 系統硬件設計根據1．工藝要求2．設備狀況3．控制功能4．I／0點數和種類5．系統的先進性
三 可編程序控制器的機型選擇1. CPU的功能2. I/0點數3. 響應速度4. 指令系統5. 機型選擇的其他考慮
四 輸入/輸出模板的選擇1．?dāng)?shù)字量輸入模塊的選擇2．?dāng)?shù)字量輸出模塊的選擇3．模擬量模塊的選擇4．智能I／0模塊的應用選擇
五 系統硬件設計文件1．系統硬件配置圖2．模塊統計表3．I／0硬件接口圖及I／0地址表
六 系統供電設計1．供電系統的保護措施2．電源模塊的選擇4． I／0模塊供電電源設計5. 系統接地設計6. 可編程序控制器供電系統設
7. 電纜設計和敷設延時中斷OB 20 ——西門子S7-300PLC組織塊OB及其應用由調用SFC 32啟動．調用SFC 32時要提供實參。OB-NR 延時中斷OB的號碼DTIME 延時長度（1至60000ms）SIGN 延時OB被調用時進入OB的啟動信息標志器RET-VAL OB 執行過程中發生錯誤時的錯誤代碼處理延時中斷的SFCSFC32
SRT_TINT 啟動延時中斷 SFC33
CAN_DINT 取消延時中斷SFC34
QRY_TINT 查詢延時中斷
I/A Series Advantage Upgrade Paths
From To (Lifecycle Phase) Adv. Upgrade Part / Model #s Description
CP10 FCP270 P270 The Field Control Processor 270 (FCP270) is a distributed, optionally fault-tolerant, field-mounted controller module. The FCP270 performs regulatory, logic, timing, and sequential control together with connected Fieldbus Modules (FBMs). It also performs data acquisition and alarm detection and notification. The FCP270 connects to the MESH control network via standard fiber optic 100 Mbps Ethernet. The fault-tolerant version of the FCP270 consists of two processor modules. These modules install in adjacent FCP270 slots in a baseplate for high speed communication between the modules. The unique and patented fault-tolerant operation of the FCP270 greatly imrpoves reliability relative to other process controllers. The fault-tolerant version of the FCP270 consists of two modules operating in parallel, with two Ethernet connections to the MESH control network. The two FCP270 modules, married together as a fault-tolerant pair, provide continuous operation of the controller in the event of virtually any hardware failure occurring within one module of the pair.
CP30A
CP30B
CP40A
CP40B
CP60
Micro I/A
CP10 ZCP270 P270 The Z-Module Control Processor 270 (ZCP270) is an optionally fault-tolerant, Z-form factor controller. The ZCP270 performs regulatory, logic, timing and sequential control together with connected Fieldbus Communications Modules (FCMs) and Fieldbus Modules. It also performs data acquisition and alarm detection notification. The ZCP270 connects to the MESH control network and FCM 100Ets/FCM100Es via standard fiber optic 100 Mbps Ethernet. The FCM100Et interfaces the 2 Mbps Module Fieldbus used by the 200 Series FBMs and the FCM100E interfaces the 2Mbps Module Fieldbus used by the 200 Series FBMs or the 268 Kbps Fieldbus used by the 100 Series FBMs. Depending on sizing considerations, the ZCP270 can be used with a mix of FCM100E and FCM100Et modules. The fault-tolerant version of the ZCP270 consists of two single-width processor modules. These modules install in adjacent ZCP270 slots in a 1x8 or 2x8 mounting structure and connect to a fault-tolerant connector to allow for high-speed communication between the modules.
資訊來源：廈門航拓電氣
|
您當前的位置: 首頁 > 行業資訊
