1C31189G01 1C31192G01
1C31189G01 1C31192G01
1C31189G01 1C31192G01
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
◆品牌熱點ABABB施耐德GE西門子發那科FOXBORO西屋
愛價格好++++++++貿+++++++++++++瘋狂降價
愛貨期短+++++++++++++++++++渠道好
愛產品好+++++++++易++++++++++原裝進口
愛數量多+++++++++++++++++++++大量庫存停產備件
愛售后服務好+++++++商++++++++++++質量保證
◆聯系人：吳工[銷售工程師]
★聯系電話：0592-5072236 * 18965131356
★聯系QQ：1665532815
★公司傳真：0592-5072083
★公司全稱：
廈門航拓電氣有限公司
★公司地址：
廈門市思明區仙岳路582號嘉怡園16樓A單元
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
系統應設有專用的蓄電池放電回路，其直流空氣斷路器容量應滿足蓄電池容量要求。
如采用高頻開關電源模塊應滿足下列要求
N+1配置，并聯運行方式，模塊總數宜不小于3塊。
監控單元發出指令時，按指令輸出電壓、電流，脫離監控單元，可輸出恒定電壓給電池浮充。
可帶電拔插更換。
軟起動、軟停止，防止電壓沖擊。
結構與元器件的要求
結構要求
柜體外形尺寸(柜體外形尺寸是指柜體框架尺寸)應采用以下兩種之一，根據需要，柜的寬度和深度可取括號中的調整值。
2200mm×800(1000、1200)mm×600(800)mm(優選值)(高×寬×深)；
2300mm×800(1000、1200)mm×550(800)mm；
高度公差為±2.5mm，寬度公差為0～-2mm，深度公差為±1.5mm。
柜體應設有保護接地，接地處應有防銹措施和明顯標志。門應開閉靈活，開啟角不小于90°，門鎖可靠。門與柜體之間應采用截面不小于6 mm2的多股軟銅緊固連接應牢固、可靠，所有緊固件均具有防腐鍍層或涂層，緊固連接應有防松措施。
Model P90 server supports a USB mouse or optional USB trackball, an alphanumeric keyboard, up to two annunciator keyboards, or annuciator panels, and up to four video monitors. The P90 server also supports multiple optional touchscreens. The Model P90 server has an Intel Xeon? processor and can be configured with up to 1.2 TB of internal hard disk storage and up to 4 GB of ECC DDR-2 SDRAM. The serial attached SCSI (SAS) supports a system disk, expansion disks, or RAID1 or RAID5 hard drive arrays. Client/Server communications are accomplished using the TCP/IP networking protocol.
AP50/51
PWs
WP20/30
AW/WP50/51
AW/WP70s
P79, P80, P81
P91
P82
Cluster I/O 200 Series I/O See Chart below for 200 Series part #s The 200 Series Field Bus Modules are the latest generation I/A Series I/O modules. The DIN rail mounted FBM subsystem provides a reliable, high speed communications interface between the host control processor (for example the I/A Series control station) and field I/O sensors and actuators. It incorporates innovative equipment packaging, and the use of fiber optic and/or coaxial cabling between modules to allow local or remote distribution of process I/O points. The DIN rail mounted Fieldbus Modules (FBMs) are compact, high-performance distributed process I/O modules. They perform the signal conversion required to interface the electrical input signals to/from the field sensors to the optionally-fault-tolerant I/A Series control station. Communication between the FBMs the I/A Series control station is via Fieldbus Communication Modules (FCMs), which interface the 2 Mbps module Fieldbus used by the FBMs with the 10 Mbps Ethernet trunk Fieldbus used by the I/A Series control station. The FBMs automatically accept communication from either communication path (A or B) of the redundant Ethernet trunk Fieldbus. Thus, if one path fails, communication is not interrupted.
100 Series I/O
V4.3 The Ethernet MESH Network (V8.x) S20 The Mesh Network represents the next revolutionary step of the I/A Series Control Network functionality, Version 8.0 release introduces unprecedented communications capability, versatility and performance to I/A Series process automation systems. The Mesh network structure provides alternate
資訊來源：廈門航拓電氣
|
您當前的位置: 首頁 > 行業資訊
