精品久久久久中文字,日韩免费看视频三区中文字幕,国产成 人亚洲91,亚洲无玛在线观看

PA6 C 38 FAM 000000德國朗盛Durethan擠出級聚酰胺6尼龍塑料（18024445500）

PA 6-Copolymer, non-reinforced, extrusion



ISO Shortname: ISO 1874 PA 6/IPDI, ES, 18-020

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Melt volume-flow rate 235 °C; 2.16 kg cm³/(10 min) ISO 1133-1 5　

Thermal properties
C Melting temperature 10 °C/min °C ISO 11357-1,-3 212　

Electrical properties (23 °C/50 % r. h.)
C Relative permittivity 1 MHz - IEC 60250　3
C Volume resistivity　Ohm·m IEC 60093　1E11
C Surface resistivity　Ohm IEC 60093　1E11
C Electric strength 1 mm kV/mm IEC 60243-1　30

Other properties (23 °C)
C Water absorption (Saturation value) Water at 23 °C % ISO 62 ~10　
C Water absorption (Equilibrium value) 23 °C; 50 % RH % ISO 62 ~3　
C Density　kg/m³ ISO 1183 1130　

Processing recommendations
Drying temperature dry air dryer　°C - 80　
Drying time dry air dryer　h - 2-6　

C These property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.